说明：  串口接收GUI(可实时观察数据图像)：使用方法 我把STM32 工程里的USER文件放进来了 整个工程太大放不下 连接STM32 ADC1 通道15到外设 把USART1接到电脑上 (程序中在DMA中断发送数据帧头) Matlab 打开GUI serial_communication2 ‘打开串口’ OK 看看数据吧 （有时可能会Matlab报错 关闭再重新执行一次GUI 这BUG一直不知道错在哪）
(A serial port receives the GUI can be real-time observation data images () : use method I put the USER in the STM32 project file came in The whole project is too large will not fit Connect the STM32 ADC1 channel 15 to took USART1 peripherals to computers (program in DMA interrupt signal data frame head) Open the Matlab GUI serial_communication2 open the serial port OK to have a look at the data (may sometimes Matlab error close once again GUI this BUG has been don t know where is wrong))