说明：  红外遥控解码程序，以一个9ms的低电平和4.5ms的高电平为引导码，后跟32位二进制代码；前16位为8位用户码及其反码，后16位为8位的操作码及其反码；以脉宽为低电平0.565ms、间隔高电平0.56ms、周期为1.125ms的组合表示 0 ；以脉宽为低电平0.565ms、间隔高电平1.685ms、周期为2.25ms的组合表示 1 。注意：接收码的脉宽与间隔是对发射码取反的，即间隔是0.565ms 解码后共有四个十六进制码，本程序取第三个作为识别码。
(Infrared remote control decoding procedures, with a low level of ms and 4.5 ms high level as the boot code, followed by a 32-bit binary code 16 yards and radix-minus-one complement for eight users before, after 16 yards and radix-minus-one complement for the operation of the eight With pulse width is low level 0.565 ms, ms cycle, high level interval 0.56 to 1.125 ms said the combination of 0 With pulse width is low level 0.565 ms, ms cycle, high level interval 1.685 to 2.25 ms said the combination of 1 .Note: receiving yards of pulse width and spacing is to launch code invert, namely interval is 0.565 ms A total of four hexadecimal code after decoding, this procedure take the third as identification number.)