pilot20170323
所属分类：嵌入式/单片机/硬件编程
开发工具：C/C++
文件大小：8369KB
下载次数：0
上传日期：2019-01-16 14:34:41
上 传 者：
along
说明： 巡逻机：可以读取RFID卡的ID码，并取当时的年月日时分秒一并存入Flash，可上传至PC，供保安或巡逻人员考勤用。
(Patrol plane: The ID code of the RFID card can be read and stored in Flash at that time. It can be uploaded to PC for security or patrol attendance.)
文件列表:
20170323\CORE\core_cm3.c (17273, 2010-06-07)
20170323\CORE\core_cm3.h (85714, 2011-02-09)
20170323\CORE\startup_stm32f10x_hd.s (15503, 2011-03-10)
20170323\CORE\startup_stm32f10x_md.s (12765, 2011-03-10)
20170323\HARDWARE\ADC\adc.c (3493, 2017-03-03)
20170323\HARDWARE\ADC\adc.h (651, 2017-02-04)
20170323\HARDWARE\FLASH\flash.c (10889, 2017-03-22)
20170323\HARDWARE\FLASH\flash.h (2920, 2017-03-02)
20170323\HARDWARE\KEY\key.c (1296, 2017-03-22)
20170323\HARDWARE\KEY\key.h (644, 2017-02-09)
20170323\HARDWARE\PROMPT\prompt.c (7460, 2017-03-23)
20170323\HARDWARE\PROMPT\prompt.h (1276, 2017-03-22)
20170323\HARDWARE\RFID\rfid.c (11859, 2017-03-22)
20170323\HARDWARE\RFID\rfid.h (1064, 2017-03-02)
20170323\HARDWARE\RTC\rtc.c (7844, 2017-03-23)
20170323\HARDWARE\RTC\rtc.h (1003, 2017-02-21)
20170323\HARDWARE\SPI\spi.c (3368, 2017-03-03)
20170323\HARDWARE\SPI\spi.h (714, 2017-02-28)
20170323\HARDWARE\TIMER\timer.c (3110, 2017-03-23)
20170323\HARDWARE\TIMER\timer.h (204, 2017-03-22)
20170323\HARDWARE\W25QXX\w25qxx.c (9388, 2017-03-02)
20170323\HARDWARE\W25QXX\w25qxx.h (2331, 2017-02-28)
20170323\HARDWARE\WKUP\wkup.c (2442, 2017-03-19)
20170323\HARDWARE\WKUP\wkup.h (712, 2017-02-10)
20170323\MALLOC\malloc.c (4561, 2014-03-16)
20170323\MALLOC\malloc.h (1719, 2014-03-16)
20170323\STM32F10x_StdPeriph_Driver\inc\misc.h (8982, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_adc.h (21690, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_bkp.h (7555, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_cec.h (6573, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_crc.h (2162, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_dac.h (15233, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_dbgmcu.h (3818, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_dma.h (20754, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_exti.h (6824, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_flash.h (25445, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_gpio.h (20175, 2012-06-20)
20170323\STM32F10x_StdPeriph_Driver\inc\stm32f10x_iwdg.h (3828, 2012-06-20)
... ...
实验器材:
MiniSTM32F103开发板V3版本
实验目的:
学习STM32自带RTC的使用
硬件资源:
1,DS0(连接在PA8)
2,串口1(波特率:9600,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过GPIO驱动,连接关系见lcd.h)
4,RTC(实时时钟)
实验现象:
本实验通过TFTLCD显示RTC时间，并可以通过usmart设置RTC时间,从而调节时间,以便大家验证
RTC功能。
注意事项:
1,4.3寸和7寸屏需要比较大电流,USB供电可能不足,请用外部电源供电(5V电源，接VOUT2即可).
2,本例程在LCD_Init函数里面(在ILI93xx.c),用到了printf,如果不初始化串口1,将导致液晶无法显示!!
3,LCD模块在开发板的LCD接口上面，必须靠右插
3,串口波特率为9600
4,请用USB线连接在USB_232,找到USB转串口后测试本例程.
5,PA9/PA10必须通过跳线帽连接在RXD/TXD上.
正点原子@ALIENTEK
2014-3-08
广州市星翼电子科技有限公司
电话：020-38271790
传真：020-36773971
购买：http://shop62103354.taobao.com
http://shop62057469.taobao.com
公司网站：www.alientek.com
技术论坛：www.openedv.com
近期下载者：
相关文件：
收藏者：