文件列表:

.travis.yml (321, 2017-11-13)
CMakeLists.txt (1752, 2017-11-13)
LICENSE (1183, 2017-11-13)
azure-iot-sdk-c-release-2017-11-03.zip (20356399, 2017-11-13)
buildSDK.sh (451, 2017-11-13)
certs.c (6477, 2017-11-13)
certs.h (327, 2017-11-13)
config.h (367, 2017-11-13)
main.c (8991, 2017-11-13)
wiring.c (1484, 2017-11-13)
wiring.h (370, 2017-11-13)

--- services: iot-hub platforms: c author: xshi --- # IoT Hub Intel Edison Client application [](https://travis-ci.com/Azure-Samples/iot-hub-c-intel-edison-client-app) > This repo contains the source code to help you get familiar with Azure IoT using the Microsoft IoT Pack for Intel Edison Starter Kit. You will find the [lesson-based tutorials on Azure.com](https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-intel-edison-kit-c-get-started). This repo contains an arduino application that runs on Intel Edison with a Grove temperature sensor, and then sends these data to your IoT hub. At the same time, this application receives Cloud-to-Device message from your IoT hub, and takes actions according to the C2D command. ## Set up your edison Follow [this page](https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-intel-edison-kit-c-get-started#setup-intel-edison) to set up your edison and enable SSH. ## Build Azure IoT SDK Clone this repo into your Intel Edison, then navigate to the repo folder to run the following command to build Azure IoT SDK ```bash sed -i -e 's/\r$//' buildSDK.sh chmod 755 buildSDK.sh buildSDK.sh ``` ## Connect your sensor with your edison ### Connect with a physical Grove temperature sensor and LED You can follow the image to connect your Grove temperature sensor and a LED with your Intel Edison.  ### DON'T HAVE A PHYSICAL Grove temperature sensor? You can use the application to simulate temperature data and send to your IoT hub. 1. Open the `config.h` file. 2. Change the `SIMULATED_DATA` value from `0` to `1`. ## Running this sample ### Build the sample code Build the sample code by the following command: ```bash cmake . && make ``` ### Run your client application Run the client application with root priviledge, and you also need provide your Azure IoT hub device connection string, note your connection should be quoted in the command. ```bash sudo ./app '' ``` ### Send Cloud-to-Device command You can send a C2D message to your device. You can see the device prints out the message and blinks once receiving the message. ### Send Device Method command You can send `start` or `stop` device method command to your Pi to start/stop sending message to your IoT hub.

近期下载者：

相关文件：

评论：[我要评论] [举报此文件]

收藏者：