文件列表:

index.c
my_first_code.pdsprj
my_first_code.pdsprj.BHOLENATH.sourabhpatyal.workspace

This code is written for an AVR microcontroller (specifically, the Atmel AVR series) using the AVR-GCC compiler. Let's break down the code and understand its functionality: In the `main()` function: - `DDRD = 0xff;` sets all pins of Port D as output. - `DDRC = 0x00;` sets all pins of Port C as input. Then, it enters an infinite `while` loop where it continuously checks the status of the first pin (Pin 0) of Port C (`PINC & 0x01`). If the pin is high (1), it sets all pins of Port D high (`PORTD = 0xff`). If the pin is low (0), it sets all pins of Port D low (`PORTD = 0x00`). So, in simple terms, this code reads the state of Pin 0 of Port C continuously. If Pin 0 of Port C is high, it sets all pins of Port D high; otherwise, it sets them low. This can be used, for example, to control LEDs connected to Port D based on the input from a switch connected to Pin 0 of Port C on the AVR microcontroller.

近期下载者：

相关文件：

评论：[我要评论] [举报此文件]

收藏者：