文件列表:

Rainlendar\3rdParty (0, 2005-07-21)
Rainlendar\3rdParty\3rdParty.dsw (1947, 2005-07-10)
Rainlendar\3rdParty\libical (0, 2005-07-21)
Rainlendar\3rdParty\libical\AUTHORS (147, 2005-07-20)
Rainlendar\3rdParty\libical\ChangeLog (27486, 2005-07-20)
Rainlendar\3rdParty\libical\config.h (3316, 2005-07-20)
Rainlendar\3rdParty\libical\design-data (0, 2005-07-21)
Rainlendar\3rdParty\libical\design-data\.cvsignore (36, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\components.txt (237, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\Makefile.am (107, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\Makefile.in (6132, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\parameters.csv (1795, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\params-in-prop.txt (1792, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\properties.csv (3311, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\restrictions.csv (52675, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\status.txt (3731, 2005-07-20)
Rainlendar\3rdParty\libical\design-data\value-types.csv (2721, 2005-07-20)
Rainlendar\3rdParty\libical\LICENSE (1492, 2005-07-20)
Rainlendar\3rdParty\libical\Makefile.in (1885, 2005-07-20)
Rainlendar\3rdParty\libical\NEWS (16224, 2005-07-20)
Rainlendar\3rdParty\libical\scripts (0, 2005-07-21)
Rainlendar\3rdParty\libical\scripts\.cvsignore (36, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\Makefile.am (218, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\Makefile.in (6234, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkderivedcomponents.pl (3214, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkderivedparameters.pl (7229, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkderivedproperties.pl (5717, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkderivedvalues.pl (5200, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkinclude.sh (996, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkneticali.pl (2080, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkparameterrestrictions.pl (1757, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkrestrictionrecords.pl (2648, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\mkrestrictiontable.pl (2128, 2005-07-20)
Rainlendar\3rdParty\libical\scripts\readvaluesfile.pl (2131, 2005-07-20)
Rainlendar\3rdParty\libical\src (0, 2005-07-21)
Rainlendar\3rdParty\libical\src\.cvsignore (36, 2005-07-20)
Rainlendar\3rdParty\libical\src\libical (0, 2005-07-21)
Rainlendar\3rdParty\libical\src\libicalss (0, 2005-07-21)
Rainlendar\3rdParty\libical\src\libicalss\.cvsignore (46, 2005-07-20)
... ...

Introduction ------------ This is the server part of the Rainlendar calendar. You only need this if you are going to use the network distribution of the events. Note that the server is meant only for single user usage. The main purpose of it is to synchronize the events between two computers. There is some additional information in the Rainlendar's documentation (see the ServerPlugin), which I suggest that you read before trying to run this server. IMPORTANT: The protocol is not secure. All the information is send as a plain text and since there is no authentication anyone can read and modify your events if they can guess the user ID. So, it is adviced that you set up your firewall so that it accepts connections from your IP. Setup ----- Just run RainlendarServer.exe (or rainlendarserver on Linux) from command prompt. You need to give the server permission to use the network in your firewall. You should try the server synchronization on the local machine first to see that everything works ok. Start the RainlendarServer.exe from command prompt and make it to listen the default port 9999. Verify that the server actually is listening to the port by running netstat -a from another command prompt (you should see that port 9999 is marked as listening). After you have the server running start the Rainlendar client (i.e. the calendar) and enable the ServerPlugin in the Config->Plugins. Go to the plugin's settings and put localhost in the Address field of the server settings and number 9999 in the Port field. You can write anything to the ID field. Then just click Ok to exit from dialogs and the client should connect to the server. Check the log on both server and client to verify this. If you get the connection established on the local machine you can move the RainlendarServer to a remote machine and start it there. Change the address field to match the ip of the remote machine and try the synchronizing again. If the connection cannot be made, you probably have a firewall on the remote machine that prevents connections to the used port. In this case you can try to use other ports or open a hole in your firewall for Rainlendar. It is also possible that the server locks up sometimes. The server will in that state just inform that it's busy and cannot serve you at the moment. If that happens you should just wait a while as the server should reset itself in couple of minutes automatically (if it doesn't, restart it manually and write a comprehensive bug-report :-). Usage ----- The server takes few optional command line arguments. -h,--help = this message -p,--port = run server on port -d,--daemonize = daemonize server (not available in win32) -l,--log = write log to a file instead to console -f,--filter = use the given file as the ip-filter -m,--multi = allow multiple instances (only in win32) -t,--target = The place where the database files are stored --install = install as service (only in win32) --remove = remove service (only in win32) --start = start service (only in win32) --stop = stop service (only in win32) Filtering --------- It is possible to filter events according to their profiles and the IP-number of the clients. You can have separate allow and deny lists for both incoming and outgoing packages. When an event comes to the server it checks the AcceptIncoming-list. If there is a match the packet is handled in the server. If there is no match the DenyIncoming is checked to see if the packet should be denied. If there is no match in both of the lists the packet is allowed to the server. The outgoing-lists work the same way. The IP-numbers are two parted consisting of the number and the mask. The mask defines how many bits are valid from the start of the number. Few examples: 0.0.0.0/0 = all IP numbers 192.168.0.1/32 = Just the 192.168.0.1 192.168.0.1/24 = IPs from 192.168.0.0 to 192.168.0.255 Todo, done and notes also have a profile that can be used for filtering. The profiles are "Todo", "Done" and "Note"; See the filter.txt for an example. Running as service ------------------ Run from command line: RainlendarServer --install RainlendarServer --start That's it. If you need to define command line arguments you can give them at the same time as the --install. Also, make sure that the server works by running it from the command line before installing it as a service. To uninstall run from command line: RainlendarServer --stop RainlendarServer --remove You need to manually remove the database files from ~/.rainlendarserver/ (in Linux) or %APPDATA%\RainlendarServer\ (in Windows). Protocol -------- - Client sends one or more events to the server ---------- ---------- | Client | | Server | ---------- ---------- | pcUpdateEvents | |-------------------------->| | | | pcWaitingForEvents | |<--------------------------| | | | pcEvent | |-------------------------->| | pcEvent | |-------------------------->| | ... | | | | | | pcResult | |<--------------------------| | | - Client requests one or more events from the server ---------- ---------- | Client | | Server | ---------- ---------- | | | pcRequestEvents | |-------------------------->| | | | pcSendingEvents | |<--------------------------| | | | pcWaitingForEvents | |-------------------------->| | | | pcEvent | |<--------------------------| | pcEvent | |<--------------------------| | ... | | | | pcResult | |-------------------------->| | | - Server can also send pcServerBusy, pcIncorrectVersion and pcError in some situations. Compiling in Linux ------------------ Everything that is needed to compile the server is included in the source package. Just uncompress it to a temporary folder. Go to the Server-folder and run: ./configure make If everything went fine you can then install the server: make install

近期下载者：

相关文件：

评论：[我要评论] [举报此文件]

收藏者：