pic18
所属分类:嵌入式/单片机/硬件编程
开发工具:C/C++
文件大小:2239KB
下载次数:71
上传日期:2012-11-22 22:56:08
上 传 者:
freesky533
说明: ● C语言程序例程。该子目录包括以下子程序:
——AD程序实现模拟量到数字量的转换功能;
——CAN程序实现CAN总线通讯功能;
——keyboard_check程序实现键盘的扫描查询方式输入;
——keyboard_disturb程序实现PORTB的"电平变化中断"进行键盘的输入;
——led0-8程序实现在8个LED上依次显示1~8数字;
——PWM程序用于使CCP1模块产生分辨率为10位的PWM波形,占空比为50 ;
——RS-232程序通过RS-232接口来完成PC计算机与单片机之间的通信;
——simple_POARD程序为外围功能模块简单应用实例,点亮与PORTD口相连的八个发光二极管;
——stopwatch程序实现计时秒表功能,时钟显示范围00.00~99.99秒,分辨度为0.01秒;
——switchinput程序用于开关量的输入(采用SPI总线),并显示在与D口相连的LED上;
——wakeup程序实现PIC18F458的休眠工作方式,并由实验板上的按键产生"电平变化中断"将其从休眠状态中激活;
——WDT程序实现"看门狗"WDT的功能;
——Yejing程序实现液晶显示器的接口和显示功能。
(● C language routine. The subdirectory include the following subroutine:
- AD program to achieve analog to digital conversion function
- The CAN program CAN bus communication functions
The- keyboard_check program keyboard scan query mode input
- Keyboard_disturb program PORTB change interrupt level "keyboard input
- Led0-8 program eight LEDs sequentially numbers 1 to 8
- PWM program for the CCP1 module produces a resolution of 10-bit PWM waveform, duty cycle of 50
- RS-232 program through the RS-232 interface to complete the communication between PC computer and microcontroller
- Simple_POARD program simple application example for the peripheral function modules, lit PORTD port connected eight light-emitting diodes
- Stopwatch stopwatch program, clock display range from 00.00 to 99.99 seconds, and a resolution of 0.01 seconds
The- switchinput program is used to switch the input (SPI bus), and display on the LED connected to port D
- Wakeup program the PIC18F458 do)
文件列表:
pic18系列单片机c语言应用实例\C语言程序例程\AD.doc (25088, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\CAN.doc (27136, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\c语言程序功能说明.doc (20480, 2004-06-28)
pic18系列单片机c语言应用实例\C语言程序例程\keyboard_check.doc (26624, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\keyboard_disturb.doc (28672, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\led0-8.doc (20992, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\PWM.doc (19968, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\RS-232.doc (20992, 2004-06-28)
pic18系列单片机c语言应用实例\C语言程序例程\simple_POARD.doc (19456, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\stopwatch.doc (32256, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\switchinput.doc (21504, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\wakeup.doc (20480, 2004-06-28)
pic18系列单片机c语言应用实例\C语言程序例程\WDT.doc (19968, 2004-06-27)
pic18系列单片机c语言应用实例\C语言程序例程\yejing.doc (54784, 2004-06-27)
pic18系列单片机c语言应用实例\MPLAB及C18安装使用简介.doc (8848896, 2004-06-28)
pic18系列单片机c语言应用实例\建立工程项目实例.doc (18164224, 2004-06-28)
pic18系列单片机c语言应用实例\汇编语言程序例程\AD.doc (37376, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\CAN.doc (32256, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\CAN2.doc (30720, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\keyboard_check.doc (32768, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\keyboard_disturb.doc (32768, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\led0-8.doc (23552, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\PWM.doc (32768, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\RS-232.doc (21504, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\simple-PORTD.doc (19456, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\stopwatch.doc (45568, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\switchinput.doc (21504, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\wakeup.doc (23040, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\WDT.doc (20480, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\YEJING.doc (82432, 2004-06-27)
pic18系列单片机c语言应用实例\汇编语言程序例程\汇编语言程序功能说明.doc (20480, 2004-06-28)
pic18系列单片机c语言应用实例\C语言程序例程 (0, 2007-03-16)
pic18系列单片机c语言应用实例\汇编语言程序例程 (0, 2007-03-16)
pic18系列单片机c语言应用实例 (0, 2007-03-16)
近期下载者:
相关文件:
收藏者: