linux2.4.0kernel-source-code
所属分类:驱动编程
开发工具:C/C++
文件大小:27348KB
下载次数:4
上传日期:2013-10-16 16:51:08
上 传 者:
素人渔夫
说明: linux-2.4.0内核源代码,分享给大家、作为参考、
(linux-2.4.0 kernel source code)
文件列表:
linux-2.4.0 (0, 2009-06-07)
linux-2.4.0\linux (0, 2009-06-07)
linux-2.4.0\linux\arch (0, 2009-06-07)
linux-2.4.0\linux\arch\alpha (0, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot (0, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\bootloader.lds (467, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\bootp.c (5534, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\head.S (1425, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\main.c (4358, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\Makefile (2549, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\tools (0, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\tools\mkbb.c (3536, 2009-06-07)
linux-2.4.0\linux\arch\alpha\boot\tools\objstrip.c (6086, 2009-06-07)
linux-2.4.0\linux\arch\alpha\config.in (10028, 2009-06-07)
linux-2.4.0\linux\arch\alpha\defconfig (14611, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel (0, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\alpha_ksyms.c (5938, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\check_asm.c (1140, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\console.c (1526, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_apecs.c (11350, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_cia.c (30512, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_irongate.c (10168, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_lca.c (14589, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_mcpcia.c (17469, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_polaris.c (5641, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_t2.c (10256, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_titan.c (13506, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_tsunami.c (13511, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\core_wildfire.c (18255, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\entry.S (24561, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\es1888.c (1325, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\head.S (2116, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq.c (18673, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq_alpha.c (6811, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq_i8259.c (4261, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq_impl.h (1944, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq_pyxis.c (2574, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq_smp.c (5416, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\irq_srm.c (1633, 2009-06-07)
linux-2.4.0\linux\arch\alpha\kernel\machvec_impl.h (4769, 2009-06-07)
... ...
$Id: README.icn,v 1.7 2000/08/06 09:22:51 armin Exp $
You can get the ICN-ISDN-card from:
Thinking Objects Software GmbH
Versbacher Rthe 159
97078 Würzburg
Tel: +49 931 2877950
Fax: +49 931 2877951
email info@think.de
WWW http:/www.think.de
The card communicates with the PC by two interfaces:
1. A range of 4 successive port-addresses, whose base address can be
configured with the switches.
2. A memory window with 16KB-256KB size, which can be setup in 16k steps
over the whole range of 16MB. Isdn4linux only uses a 16k window.
The base address of the window can be configured when loading
the lowlevel-module (see README). If using more than one card,
all cards are mapped to the same window and activated as needed.
Setting up the IO-address dipswitches for the ICN-ISDN-card:
Two types of cards exist, one with dip-switches and one with
hook-switches.
1. Setting for the card with hook-switches:
(0 = switch closed, 1 = switch open)
S3 S2 S1 Base-address
0 0 0 0x300
0 0 1 0x310
0 1 0 0x320 (Default for isdn4linux)
0 1 1 0x330
1 0 0 0x340
1 0 1 0x350
1 1 0 0x360
1 1 1 NOT ALLOWED!
2. Setting for the card with dip-switches:
(0 = switch closed, 1 = switch open)
S1 S2 S3 S4 Base-Address
0 0 0 0 0x300
0 0 0 1 0x310
0 0 1 0 0x320 (Default for isdn4linux)
0 0 1 1 0x330
0 1 0 0 0x340
0 1 0 1 0x350
0 1 1 0 0x360
0 1 1 1 NOT ALLOWED!
1 0 0 0 0x308
1 0 0 1 0x318
1 0 1 0 0x328
1 0 1 1 0x338
1 1 0 0 0x348
1 1 0 1 0x358
1 1 1 0 0x368
1 1 1 1 NOT ALLOWED!
The ICN driver may be built into the kernel or as a module. Initialization
depends on how the driver is built:
Driver built into the kernel:
The ICN driver can be configured using the commandline-feature while
loading the kernel with LILO or LOADLIN. It accepts the following syntax:
icn=p,m[,idstring1[,idstring2]]
where
p = portbase (default: 0x320)
m = shared memory (default: 0xd0000)
When using the ICN double card (4B), you MUST define TWO idstrings.
idstring must start with a character! There is no way for the driver
to distinguish between a 2B and 4B type card. Therefore, by supplying
TWO idstrings, you tell the driver that you have a 4B installed.
If you like to use more than one card, you can use the program
"icnctrl" from the utility-package to configure additional cards.
You need to configure shared memory only once, since the icn-driver
maps all cards into the same address-space.
Using the "icnctrl"-utility, portbase and shared memory can also be
changed during runtime.
The D-channel protocol is configured by loading different firmware
into the card's memory using the "icnctrl"-utility.
Driver built as module:
The module icn.o can be configured during "insmod'ing" it by
appending its parameters to the insmod-commandline. The following
syntax is accepted:
portbase=p membase=m icn_id=idstring [icn_id2=idstring2]
where p, m, idstring1 and idstring2 have the same meanings as the
parameters described for the kernel-version above.
When using the ICN double card (4B), you MUST define TWO idstrings.
idstring must start with a character! There is no way for the driver
to distinguish between a 2B and 4B type card. Therefore, by supplying
TWO idstrings, you tell the driver that you have a 4B installed.
Using the "icnctrl"-utility, the same features apply to the modularized
version like to the kernel-builtin one.
The D-channel protocol is configured by loading different firmware
into the card's memory using the "icnctrl"-utility.
Loading the firmware into the card:
The firmware is supplied together with the isdn4k-utils package. It
can be found in the subdirectory icnctrl/firmware/
There are 3 files:
loadpg.bin - Image of the bootstrap loader.
pc_1t_ca.bin - Image of firmware for german 1TR6 protocol.
pc_eu_ca.bin - Image if firmware for EDSS1 (Euro-ISDN) protocol.
Assuming you have installed the utility-package correctly, the firmware
will be downloaded into the 2B-card using the following command:
icnctrl -d Idstring load /etc/isdn/loadpg.bin /etc/isdn/pc_XX_ca.bin
where XX is either "1t" or "eu", depending on the D-Channel protocol
used on your S0-bus and Idstring is the Name of the card, given during
insmod-time or (for kernel-builtin driver) on the kernel commandline.
To load a 4B-card, the same command is used, except a second firmware
file is appended to the commandline of icnctrl.
-> After downloading firmware, the two LEDs at the back cover of the card
(ICN-4B: 4 LEDs) must be blinking intermittently now. If a connection
is up, the corresponding led is lit continuously.
For further documentation (adding more ICN-cards), refer to the manpage
icnctrl.8 which is included in the isdn4k-utils package.
近期下载者:
相关文件:
收藏者: