FreeRTOS_HC(S)08_Version_1.0
所属分类:单片机开发
开发工具:Others
文件大小:292KB
下载次数:48
上传日期:2007-02-19 16:59:01
上 传 者:
thanatos003
说明: 这是CodeWarrior环境下基于freescale单片机上的实时操作系统代码.
(This is the CodeWarrior environment freescale microcontroller based on the real-time operation system code.)
文件列表:
249973 (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0 (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\bin (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\bin\P&E_ICD.abs (133037, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\bin\P&E_ICD.abs.s19 (7056, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\bin\P&E_ICD.map (51887, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\Monitor_Postload.cmd (111, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\Monitor_Preload.cmd (71, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\Monitor_Reset.cmd (60, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\Monitor_Startup.cmd (59, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_FCS_Postload.cmd (111, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_FCS_Preload.cmd (60, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_FCS_Reset.cmd (60, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_FCS_Startup.cmd (59, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_ICD_Postload.cmd (111, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_ICD_Preload.cmd (60, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_ICD_Reset.cmd (60, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\cmd\P&E_ICD_Startup.cmd (59, 2005-09-20)
249973\FreeRTOS_HC(S)08_Version_1.0\C_Layout.hwl (856, 2002-11-27)
249973\FreeRTOS_HC(S)08_Version_1.0\Default.mem (161, 2002-11-27)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0.mcp (98887, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\CWSettingsWindows.stg (4396, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\Monitor (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\Monitor\TargetDataWindows.tdt (38943, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_FCS (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_FCS\TargetDataWindows.tdt (38950, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode (0, 2011-02-18)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\heap_1.c.o (7536, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\list.c.o (10196, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\Main.c.o (9572, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\MC9S08GB60.C.o (60678, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\port.c.o (8353, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\queue.c.o (20400, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\Start08.c.o (6057, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\tasks.c.o (32592, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\ObjectCode\TickTimer.C.o (10033, 2006-04-07)
249973\FreeRTOS_HC(S)08_Version_1.0\FreeRTOS_HC(S)08_Version_1.0_Data\P&E_ICD\TargetDataWindows.tdt (159228, 2006-04-07)
... ...
------------------------------------------------------------------------
Readme.txt
------------------------------------------------------------------------
This project stationery is designed to get you up and running quickly
with CodeWarrior for MC9S08GB60 and FreeRTOS Version 3.2.0
It is set up for the selected CPU and target connection,
but can be easily modified.
Sample code for the following language(s) is at your disposal:
- C
The wizard has prepared CodeWarrior target(s) with the connection methods of
your choice:
- P&E FCS:
This interface/target is prepared to use the FCS (Full Chip Simulation)
from P&E. Note that you can switch to hardware debugging in a seamless way,
using the menu PEDebug > Mode in the debugger.
- P&E ICD:
This interface/target is prepared to use the ICD (In-Circuit
Debugging/Programming) from P&E. Note that you can switch to simulation in
a seamless way, using the menu PEDebug > Mode in the debugger. Depending on
your hardware type, you will need to configure the communication settings
(class of device, baud rate, etc).
Please consult your hardware documentation for additional details.
- Monitor:
This interface/target connects to the on-chip Motorola serial monitor.
This monitor uses on-chip resources and the SCI. See Motorola application
note AN2140 for details.
The debugger is using GDI (Generic Debugging Interface) to connect to the
serial monitor. Using the on-chip DBG module of HCS08 devices,
trace is supported as well. You can load the trace component
using the menu Component > Open in the debugger.
Additional connections can be chosen in the simulator/debugger,
use the menu Component > Set Target.
------------------------------------------------------------------------
Getting Started
------------------------------------------------------------------------
To build/debug your project, use the menu Project > Debug or press F5.
This will open the simulator/debugger.
Press again F5 in the debugger (or menu Run > Start/Continue) to start
the application. The menu Run > Halt or F6 stops the application.
In the debugger menu Component > Open you can load additional components.
------------------------------------------------------------------------
Project structure
------------------------------------------------------------------------
The project generated contains various files/folders:
- readme.txt: this file
- Sources: folder with the application source code
- Project Setup Files: All setup folders/files for this project
- Startup Code: C/C++ startup code
- Prm:
- burner.bbl file to generate S-Records
- the linker .prm file
- the .map file generated by the linker
- Libs: needed library files (ANSI, derivative header/implementation files)
- Debugger Project File: contains a .ini file for the debugger for each
connection
- Debugger Cmd Files: contains sub-folders for each connection with command
files
------------------------------------------------------------------------
Adding your own code
------------------------------------------------------------------------
Once everything is working as expected, you can begin adding your own code
to the project. Keep in mind that we provide this as an example of how to
get up and running quickly with CodeWarrior. There are certainly other
ways to handle interrupts and set up your linker command file. Feel free
to modify any of the source provided.
------------------------------------------------------------------------
Simulator/Debugger: Additional components
------------------------------------------------------------------------
In the simulator/debugger, you can load additional components. Try the menu
Component > Open.
------------------------------------------------------------------------
Additional documentation
------------------------------------------------------------------------
Check out the online documentation provided. Use in CodeWarrior IDE the
menu Help > Online Manuals.
For FreeRTOS documentation check the HELP folder located within the
project root folder or on the web at:
http://www.FreeRTOS.org
------------------------------------------------------------------------
Contacting Metrowerks
------------------------------------------------------------------------
For bug reports, technical questions, and suggestions, please use the
forms in the Release Notes folder installed, and send them to:
USA: support@metrowerks.com
EUROPE: support_europe@metrowerks.com
ASIA/PACIFIC: j-emb-sup@metrowerks.com
近期下载者:
相关文件:
收藏者: