RT-Thread1.2.0
所属分类：其他嵌入式/单片机内容
开发工具：C/C++
文件大小：26610KB
下载次数：121
上传日期：2014-10-26 01:28:54
上 传 者：
PRui
说明： 晟睿STM32F103ZET6开发板跑RT Thread，内核为1.2.0，GUI为0.8版本，可以下载到板子上跑。
1、TFT根据RT Thread驱动框架编写，FSMC总线，可直接用。适合常用的9320、9325、9328TFT驱动。
2、SPI W25Qxx Nor flash驱动，可存储字库和文件系统。
3、实时时钟（ＲＴＣ），可用串口指令设置时间和日期，串口打印，显示在LCD上只需调用LCD显示函数即可。
4、三个串口驱动、IIC驱动，串口1为shell脚本交互窗口，波特率9600，可根据实际修改。
5、可演示官方Demo例程。
6、SDIO TF卡，用来挂载文件系统和保存字库、图片等，板子上是SPI的卡槽，自己跳线为SDIO接口，速度比SPI快很多，SDIO接口可查看STM32手册，源码中也可查看。
7、触摸屏功能和外部RAM还存在小问题，正在修改中。
(网络问题不确定是否上传成功，再上传一次)
(Sheng Rui STM32F103ZET6 development board ran RT Thread, kernel 1.2.0, GUI 0.8 version can be downloaded to run on the board.
1, TFT-driven framework based on RT Thread writing, FSMC bus, can be directly used. For common 9320,9325,9328TFT drive.
2, SPI W25Qxx Nor flash drive can store fonts and file systems.
3, the real-time clock (RTC), available serial port command to set the time and date, serial printer, displayed on the LCD display function can simply call the LCD.
4, three serial driver, IIC drive, serial port a shell script interactive window, baud rate 9600, according to the actual changes.
5, can demonstrate official Demo routine.
6, SDIO TF card, used to mount the file system and preserving fonts, images, etc., is SPI s slot on the board, own jumper for SDIO interface, much faster than the SPI, SDIO interface can view the STM32 manual, source code is also viewable.
7, touch screen functions and external RAM there is a small problem, being revised.)
文件列表:
RT Thread1.2.0\RT GUI\project\applications\application.c (2546, 2014-10-25)
RT Thread1.2.0\RT GUI\project\applications\mnttable.c (583, 2014-10-21)
RT Thread1.2.0\RT GUI\project\applications\SConscript (269, 2014-02-28)
RT Thread1.2.0\RT GUI\project\applications\setup.c (5000, 2014-10-21)
RT Thread1.2.0\RT GUI\project\applications\setup.h (322, 2014-03-10)
RT Thread1.2.0\RT GUI\project\applications\startup.c (2649, 2014-02-28)
RT Thread1.2.0\RT GUI\project\applications\ui_init.c (1601, 2014-03-10)
RT Thread1.2.0\RT GUI\project\build\application.crf (426638, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\application.d (4904, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\application.o (443904, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\asc12font.crf (91930, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\asc12font.d (1875, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\asc12font.o (86860, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\asc16font.crf (47481, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\asc16font.d (1183, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\asc16font.o (57376, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\backtrace.crf (34956, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\backtrace.d (571, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\backtrace.o (25312, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\backtrace.__i (988, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\blit.crf (47396, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\blit.d (940, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\blit.o (47800, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\board.crf (421665, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\board.d (4041, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\board.o (435208, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\box.crf (98071, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\box.d (1905, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\box.o (92900, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\button.crf (143461, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\button.d (4050, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\button.o (138304, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\calibration.crf (119657, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\calibration.d (2804, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\calibration.o (111884, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\ccfile.crf (52385, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\ccfile.d (1091, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\ccfile.o (42432, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\checkbox.crf (136929, 2014-10-25)
RT Thread1.2.0\RT GUI\project\build\checkbox.d (4059, 2014-10-25)
... ...
-- cn --
按需要生成工程文件:
1. 修改 rtconfig.py :
CROSS_TOOL='keil' #使用的工具链
STM32_TYPE = 'STM32F10X_HD' #STM32对应的型号.
2. 修改 rtconfig.h 配置需要的功能.
2. 执行 scons --target=mdk 生成MDK工程文件.
note: 需要安装 python,scons.
-- en --
近期下载者：
相关文件：
收藏者：