说明：  嵌入式Linux 内核移植相关代码分析 本文通过整理之前研发的一个项目(ARM7TDMI +uCLinux)，分析内核启动过程及需要修改的文件，以供 内核移植者参考。整理过程中也同时参考了众多网友的帖子，在此谢过。由于整理过程匆忙，难免错误 及讲解的不够清楚之处，请各位网友指正，这里提前谢过。本文分以下部分进行介绍： 1. Bootloader 及内核解压 2. 内核启动方式介绍 3. 内核启动地址的确定 4. arch/armnommu/kernel/head-armv.S 分析 5. start_kernel()函数分析
(Embedded Linux kernel analysis of transplant-related code before finishing this article through a project of research and development (ARM7TDMI+ UCLinux), analysis of the kernel boot process and the need to revise the documents for reference kernel transplantation. At the same time, finishing the course with reference to the many friends of the post, in this thanked. As a result of finishing the course of a hurry, it is inevitable errors and to explain the lack of clarity, please correct me friends here thanked in advance. This article introduce the following parts: 1. Bootloader and kernel decompression 2. Introduction 3 core start-up mode. Kernel start address identified 4. Arch/armnommu/kernel/head-armv.S Analysis 5. Start_kernel () function Analysis)