说明：  1.under bootloader 1)cd your_dir/mrua_EM8620L_2.5.115.RC8_dev.arm.bootirq/MRUA_src/loader 2)将flash_v3.c改名为flash.c替换原来的flash.c 3)编译 2.under linux kernel 1)cd armutils_2.5.108.0/build_arm/linux-2.4.22-em86xx/drivers/mtd 2)将mtdblock_v4.c改名为mtdblock.c替换原来的mtdblock.c 3)cd armutils_2.5.108.0/build_arm/linux-2.4.22-em86xx/drivers/mtd/chips 4)将cfi_cmdset_0002_v4.c改名为cfi_cmdset_0002.c替换原来的cfi_cmdset_0002.c 5)编译。 note:如果在使用cat等指令写flash的过程中出现下面的信息： Flash write to Buffer aborted @ 0x****** = 0x****** 是正常信息。
(1.under bootloader 1) cd your_dir/mrua_EM8620L_2.5.115.RC8_dev.arm.bootirq/MRUA_src/loader 2) will be renamed as flash_v3.c replacement flash.c original flash.c 3) compile 2.under linux kernel 1) cd armutils_2.5.108.0/build_arm/linux-2.4.22-em86xx/drivers/mtd 2) will be renamed as mtdblock_v4.c replacement mtdblock.c original mtdblock.c 3) cd armutils_2.5.108.0/build_arm/linux-2.4 .22-em86xx/drivers/mtd/chips 4) will be renamed as cfi_cmdset_0002_v4.c replacement cfi_cmdset_0002.c original cfi_cmdset_0002.c 5) compiler. note: If the cat, such as instruction in the use of flash in the process of writing the following information: Flash write to Buffer aborted @ 0x****** = 0x****** is normal information.)