文件列表:

ARM\includes.h (648, 1999-11-02)
ARM\os_cpu.h (4251, 1999-12-29)
ARM\Os_cpu_a.s (7365, 2001-01-20)
ARM\os_cfg.h (3497, 2000-03-10)
ARM\NedHAL_Entry.c (772, 2000-04-06)
ARM\Os_cpu_c.c (8233, 2000-04-06)
ARM (0, 2000-02-28)

Readme for ARM U/COS II port v1.04 (last updated: 20th January 2001) -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= by Niall Douglas CHANGES 20/Jan/01: OSRunning, OSPrioRdy & OSPrioCur are byte values and I was using word ops hence breaking code compiled for Thumb. Apologies to anyone inconvenienced and thanks to Arjan Oskam for pointing it out Herein contained are the files to port U/COS II to a *generic* ARM. There is no code specific to any particular ARM other than it must run in a 32 bit mode (ie; ARM2 and ARM3 processors won't run this). Quick start: -=-=-=-=-=-= ALL YOU MUST DO TO USE THIS PORT: Go to the file os_cpu_a.s. Go to the function OSIntCtxSw. Change the registers unwound appropriately (they WILL ALTER across versions of ARM SDT used - I've put in entries for v2.5 and v2.0 of the SDT). If your run-time system supports OS_EnterOS (SWI 0x16), you're ready. More detail: -=-=-=-=-=-= However, there are a number of assumptions made. The first is that there are both SWI and IRQ handlers provided. The IRQ handler must call OSIntEnter(), OSTimeTick() and OSIntExit() for timer interrupts as the U/COS II book says. The SWI handler must at least provide SWI OS_EnterOS (0x16) and optionally SWI's OS_IntOn (0x13) and OS_IntOff (0x14). These work as the *RISC-OS* ones used to, not as some RTOS's broken implementations do. Demon I believe implements these fine, Angel does not. To be specific here: * OS_EnterOS: Must exit with processor mode now SVC32, interrupt & flag state *unchanged*. Also, and it's here where many RTOS's are broken, SPSR_svc on exit must contain the *correct* prior PSR before the call to OS_EnterOS. * OS_IntOff: Must exit with merely interrupts disabled, nothing else changed. If you change OS_CRITICAL_METHOD to 2, you don't need this call. * OS_IntOn: Must exit with merely interrupts enabled, nothing else changed. If you change OS_CRITICAL_METHOD to 2, you don't need this call. Potential stack corruption: -=-=-=-=-=-=-=-=-=-=-=-=-=- Other notes: If you are using OS_CRITICAL_METHOD 2, you must be careful in writing code protected by OS_ENTER_CRITICAL and OS_EXIT_CRITICAL. The problem is that the current interrupt state is saved on the SVC stack. This poses no problems to C code running in USR mode, but C code running in SVC mode may have stack problems as the calls OSStackAndDisableInts() (called by OS_ENTER_CRITICAL) and OSRestoreStackedIntState() (called by OS_EXIT_CRITICAL) are not APCS compliant as they don't leave the stack in the same state as they received it. This normally isn't a problem unless the compiler is using the stack for temporary workspace whose allocation and deallocation isn't nested within the calls. There are two work-arounds for this problem. First is to change OSStackAndDisableInts() and OSRestoreStackedIntState() to stack the saved interrupt state on the FIQ stack instead of the SVC one. This causes increased overhead. The second option is to *always* encapsulate code between the OS_ENTER_CRITICAL and OS_EXIT_CRITICAL in a scope declaration eg; OS_ENTER_CRITICAL(); { char temp[256]; // Do stuff } OS_EXIT_CRITICAL(); This forces the compiler to deallocate temporary stack usage before calling OS_EXIT_CRITICAL. Remember this problem ONLY affects C code which may run in SVC mode. If it's IRQ mode (eg; IRQ handlers written in C) or any other mode then it is NOT a problem. Other small notes: If you enable OS_TASK_DEL_EN, tasks will auto-call OSTaskDel(OS_PRIO_SELF) if they ever try returning. If not, the reset vector is called. This behaviour can be changed in os_cpu_c.c. The C code correctly handles OS_STK_GROWTH although it assumes a full descending stack for 1 and an empty ascending stack for 2. The assembler code always assumes a full descending stack as the relevent ARM instructions embody how stacks move and hence lots of conditional code would be needed to use a different stack type. Processor stacks on the ARM haven't been anything other than full descending for at least a decade now, so I'd imagine this limitation won't be a problem. What is "NedHAL"? (I keep seeing references to it) -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= As the NedHAL manual says ... NedHAL is a modular architecture-independent multiprocessing capable Hardware Abstraction Layer for everything from tiny embedded systems upwards. It was designed to remedy many of the shortcomings of traditional embedded HAL's and RTOS's NedHAL was the project I undertook as part of reading the final year of my Software Engineering degree at Hull University in the United Kingdom. It is roughly equivalent in function to ARM's uHAL but is improved. As part of my project, I ported U/COS II to NedHAL. My port of U/COS II is generic, but all the gubbins required to make it work (setting up the environment and etc) would be performed by something like NedHAL. NedHAL can be downloaded from http://www.nedprod.com/NedHAL/. It is supplied "as is" and may be used for any non-commercial application. See the licence.txt file for more info. All the best, Niall Douglas 8th July 2000 (Email: NedHAL@nedprod.com)

近期下载者：

相关文件：

评论：[我要评论] [举报此文件]

收藏者：