Register.rar - 很好的驱动开发资料,驱动安装过程中针对注册表的操作,2008-04-24 10:09:01,下载29次
directshow_Ball.rar - directshow的一个例子。
This sample illustrates format negotiation and the use of the
source filter base classes CSource and CSourceStream. ,2007-10-15 10:36:59,下载18次
cpress_extr_intr.rar - The purpose of this example is to demonstrate that the
functioning of External interrupts (INT0, INT1, INT4, INT5 and INT6) and
how toset them up.
This directory contains the frameworks fw.c, the test program extr_intr.c
and the external interrupt service routines isr.c. This was compiled
using micro vision2.,2007-10-15 10:33:46,下载2次
cpress_Memtest.rar - This directory contains the memtest 8051 firmware
for the Anchor Chips EZ-USB chip.
The purpose of this software is to test the different
memory segments in the Ez-Usb chip.
This example will output the string "good" on the 7 segment
LED if the mem test passes, or it will output the first address
where the memtest fails.
,2007-10-15 10:32:50,下载4次
Bulk_use_src.rar - bulk endpoint endless source/sink firmware.
EP2OUT will always accept a bulk OUT
EP4OUT will always accept a bulk OUT
EP6IN will always return a 512 byte packet. The packet contains an
incrementing byte starting at 0x02. Since EP6 always returns a 512
byte packet, this endpoint should never be accessed except with a
high-speed host controller.
EP8IN will continuously return the packet most recently written to
EP4OUT
,2007-10-15 10:32:01,下载4次
Bulkloop.rar - this bulk loopback firmware based on the firmware frameworks.
Loops back EP2OUT to EP6IN and EP4OUT to EP8IN.
Building this example requires the full version of the Keil Tools.
,2007-10-15 10:31:14,下载3次
Cypress_ax.rar - cpress usb 芯片Vender 处理固件。
The purpose of this software is to demonstrate how
to implement vendor specific commands.
The following vendor specific commands are implemented:
A0 Firmware Upload/Download
A2 EEProm Load
A3 External Ram Load
A4 Set I2C Addr
A5 Get IIC Type (1 Byte or 2 Byte EEPROM)
A6 Get Chip Rev
A8 Renumerate
,2007-10-15 10:29:49,下载13次