eth_lcd_ip_addre_mikroc_pic.rar - ethernet,lcd,ip address,2017-07-15 03:13:35,下载1次
pid_library_other_pic32.zip - { interface }
type TPIDController =
record
PID_Kp, PID_Ki, PID_Kd: real;
PID_Integrated : real;
PID_Prev_Input: real;
PID_MinOutput, PID_MaxOutput: real;
PID_First_Time, PID_Int_Improvement, PID_Diff_Improvement: boolean;
PID_Prev_AbsError: real;
end;
procedure Init_PID(var Controller: TPIDController; Kp, Ki, Kd, MinOutput, MaxOutput: real);
// Initialises the PID engine of "Controller"
// Kp = the "proportional" error multiplier
// Ki = the "integrated value" error multiplier
// Kd = the "derivative" error multiplier
// MinOutput = the minimal value the output value can have (should be < 0)
// MaxOutput = the maximal value the output can have (should be > 0),2017-07-15 03:11:25,下载1次
i2c_master_slave_pic.zip - This I2C library contains the following functionalities:
- master/slave communication
- timeout in case of bus failure
- self recovery after timeout
- possibility to write one of 32 bytes slave registers
In the archive you can find the hardware schematic, some photos of the working platform, the required libraries and an working example. In the example the master MCU writes 2 bytes to the slave MCU which then sums them together. Then the MCU read the result and print it on the LCD. In case of I2C failure, either a TIMEOUT or FAILURE message will be printed on the LCD depending of which line was break. The MCU uses for both master and slave was PIC16F887. It use internal clock at 8Mhz so no cristal is required.,2017-07-15 03:09:44,下载4次
LPC1768_TFTLCD3.2_2.8.rar - full program and source for tft,2017-07-15 03:02:21,下载1次
XPT2046.txt.rar - DRIVER for touch driver IC XPT2046,2017-07-15 02:56:27,下载1次