jayforgood

积分:159
上传文件:4
下载次数:1
注册日期:2020-01-11 23:24:33

上传列表
FreeRTOS.zip - Connect one pin from your pot to 5V, the center pin to analog pin 0 and the remaining pin to ground. Next, connect a 220 ohm current limiting resistor to digital pin 9, with an LED in series. The long, positive leg (the anode) of the LED should be connected to the output from the resistor, with the shorter, negative leg (the cathode) connected to ground,2020-01-11 23:49:20,下载0次
Blink.zip - Blink Without Delay Sometimes you need to do two things at once. For example you might want to blink an LED while reading a button press. In this case, you can't use delay(), because Arduino pauses your program during the delay(). If the button is pressed while Arduino is paused waiting for the delay() to pass, your program will miss the button press.,2020-01-11 23:42:48,下载0次
Blink.zip - This example shows the simplest thing you can do with an Arduino or Genuino to see physical output: it blinks the on-board LED.,2020-01-11 23:36:42,下载0次
bootload.zip - 在给的源码基础上 将SPI2通讯改为SPI1后ping正常,然后通过串口发送app.bin来传输PC上的文件,串口显示文件不存在,但是很奇怪的是串口打印的数据 文件名app.bin后面有几个空格,然后我仿真观察UDP发送的数据,发现也是,文件名后面莫名其妙的多了几个FF,源码太大 没法传送,只能传送照片,求解惑,2020-01-11 23:30:09,下载0次

近期下载
STM32+W5500+IAP.rar - 使用W5500网络芯片,利用HTTP协议,实现了远程下载程序到STM32ZE单片机。

收藏