文件列表:

ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\core_cm3.c (17206, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\core_cm3.h (46533, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\arm\startup_stm32f10x_cl.s (15600, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\arm\startup_stm32f10x_hd.s (15872, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\arm\startup_stm32f10x_ld.s (12164, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\arm\startup_stm32f10x_md.s (12564, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\gcc\startup_stm32f10x_cl.s (12531, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\gcc\startup_stm32f10x_hd.s (13007, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\gcc\startup_stm32f10x_ld.s (9505, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\gcc\startup_stm32f10x_md.s (9994, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\iar\startup_stm32f10x_cl.s (16309, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\iar\startup_stm32f10x_hd.s (16709, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\iar\startup_stm32f10x_ld.s (12333, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\startup\iar\startup_stm32f10x_md.s (12594, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\stm32f10x.h (593385, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\system_stm32f10x.c (30616, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\CM3\system_stm32f10x.h (2404, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\Core\Documentation\CMSIS_Core.htm (52463, 2009-06-23)
ethernet_MAIN_MII\Libraries\CMSIS\License.doc (39936, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\fifo.h (1075, 2009-11-12)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\misc.h (8893, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_adc.h (21441, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_bkp.h (7466, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_can.h (20503, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_crc.h (2073, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_dac.h (13775, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_dbgmcu.h (3134, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_dma.h (20573, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_exti.h (6682, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_flash.h (19528, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_fsmc.h (26187, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_gpio.h (17294, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_i2c.h (17982, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_iwdg.h (3739, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_pwr.h (4294, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_rcc.h (29022, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_rtc.h (3768, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_sdio.h (21774, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_spi.h (18096, 2009-06-23)
ethernet_MAIN_MII\Libraries\STM32F10x_StdPeriph_Driver\inc\stm32f10x_tim.h (44904, 2009-06-23)
... ...

RS232串口转以太网TCP/IP双向传输接口使用说明： 本装置有5个串口,初始波特率为9600，一个以太网接口，采用的是TCP连接，端口号1025，初始参数为IP地址：192.168.0.15，子网掩码：255.255.255.0，网关：192.168.0.1。 上位机通过TCP连接到本装置的1025端口后即可向串口发送数据，通讯协议如下： 需要对哪个串口发送数据，在数据前加1～5中相应的数字即可，例如要通过串口4发送数据，在上位机发送4××××，××××将通过串口4发送出去； 如果需要读取串口返回的数据，发送相应的串口号即可读取。例如要读取串口4接受的数据，上位机发送4，数据将从缓冲区中读出。 其他测试与设置指令如下： 上位机发送6，转换设备将复位； 上位机发送7，将返回软件的版本号“Software Version 1.0\n”，可用于测试TCP连接是否成功； 上位机发送0后面接IP地址，子网掩码和网关，将为转换器设置新输入的参数。例如要设置的IP地址，子网掩码和网关为192.168.0.100，255.255.255.0，192.168.0.1 则上位机发送0192168000100255255255000192168000001，请注意，IP地址，子网掩码，网关中的0要输入为000，且顺序是IP地址，子网掩码和网关，不能改变。如果忘记设备的参数，可以按复位键，参数将还原成初始参数。 注意：为每个串口设置的缓冲区大小有限，如果长时间不读取串口数据，在连续接受串口数据的情况下，有可能造成缓冲区溢出。 串口寄存器设置含义：U16 0xFFFF ------------------------------------------------------------------ | [23..22] | [21..20] | [19..18] | [17] | [16..0] | ------------------------------------------------------------------ | Mode | Parity | StopBits | WordLength | BaudRate | ------------------------------------------------------------------ Mode: [15]Send/TX Enable 发送使能 高电平有效 [14]Receive/RX Enable 接受使能 高电平有效 Parity:[13..12] 00:None 无校验 01:Even 偶校验，占用数据的末位 10:Odd 奇校验，占用数据的末位 StopBits:[11..10] 00:0.5bit 0.5位结束位 01:1bit 1位结束位 10:1.5bits 1.5位结束位 11:2bits 2位结束位 WordLength:[9] 0:8bits 8位字长 1:9bits 9位字长 BaudRate:[8..0] 从1200到115200的波特率

近期下载者：

相关文件：

评论：[我要评论] [举报此文件]

收藏者：