• PUDN用户
    了解作者
  • VBScript
    开发工具
  • 5.1MB
    文件大小
  • rar
    文件格式
  • 0
    收藏次数
  • 1 积分
    下载积分
  • 8
    下载次数
  • 2005-08-28 07:45
    上传日期
CAD 中ewz软件! 装上马上可以用!
EWB512.rar
  • EWB512
  • MODELS
  • SUBCKTS
  • ANALOG.LIB
    1.5KB
  • LINEAR.LIB
    46B
  • BURR_BRN.LIB
    9.8KB
  • ANALOGT.LIB
    369.9KB
  • DEFAULT.LIB
    276B
  • ELANTEC.LIB
    142B
  • IRF_IGBT.LIB
    483B
  • VOLTREG.LIB
    24B
  • OPAMP_5T
  • TXAS_401.LIB
    96B
  • ANALOG.LIB
    6.8KB
  • OPA2-4XX.LIB
    318B
  • TXAS_1_1.LIB
    196B
  • HRIS_CMP.LIB
    96B
  • MCXXXX.LIB
    792B
  • LM6XX.LIB
    290B
  • TXAS_1_2.LIB
    196B
  • LHXXXX.LIB
    200B
  • TXAS_5_2.LIB
    764B
  • MAXIM.LIB
    899B
  • MISCEL.LIB
    159B
  • LMCXXXX.LIB
    212B
  • TXAS_102.LIB
    936B
  • LPXXXX.LIB
    102B
  • MISC.LIB
    16B
  • TXAS_302.LIB
    480B
  • LFXXX.LIB
    491B
  • LTXXXX.LIB
    1.5KB
  • LINEAR.LIB
    3.8KB
  • OPXXX.LIB
    272B
  • NATIONAL.LIB
    1.3KB
  • TXAS_MOD.LIB
    2.2KB
  • TEXAS.LIB
    424.2KB
  • LM7XX.LIB
    217B
  • TXAS_3_2.LIB
    48B
  • OPA77-TL.LIB
    88B
  • COMLNEAR.LIB
    299B
  • BURR_BRN.LIB
    2KB
  • MAXM_CMP.LIB
    184B
  • DEFAULT.LIB
    85B
  • HAXXXX.LIB
    582B
  • HARRIS.LIB
    806B
  • lm.lib
    89B
  • TXAS_3_1.LIB
    347B
  • ELANTEC.LIB
    1.1KB
  • TEXS_CMP.LIB
    234B
  • LM2XX.LIB
    276B
  • TXAS_5_1.LIB
    1.3KB
  • TXAS_101.LIB
    1.1KB
  • TXAS_301.LIB
    810B
  • LM3XX.LIB
    303B
  • OPA6XXXX.LIB
    1.3KB
  • LM1XX.LIB
    327B
  • TXAS_402.LIB
    96B
  • OPA1XXXX.LIB
    336B
  • MOTOROLA.LIB
    813B
  • JFET_P
  • NATIONL1.LIB
    3.1KB
  • NATIONL2.LIB
    200B
  • DEFAULT.LIB
    215B
  • PHILIPS.LIB
    184B
  • MOTOROLA.LIB
    2.4KB
  • BJT_PNP
  • misc.lib
    1.8KB
  • NATIONL1.LIB
    42.9KB
  • NATIONL2.LIB
    56.5KB
  • TOSHIBA.LIB
    50.5KB
  • TOSH_PWR.LIB
    140.1KB
  • ZETEX.LIB
    1.8KB
  • DEFAULT.LIB
    595B
  • HARRIS.LIB
    144.3KB
  • PHILIPS2.LIB
    99.9KB
  • ewb.lib
    597B
  • NATIONL3.LIB
    1.5KB
  • MOTOROLA.LIB
    142.5KB
  • PHILIPS1.LIB
    107.1KB
  • ZENER
  • MOTOR_1N.LIB
    3.6KB
  • misc.lib
    463B
  • MOTO_BZX.LIB
    2.6KB
  • DEFAULT.LIB
    225B
  • MOTOR_MZ.LIB
    1.4KB
  • GENERAL.LIB
    1.6KB
  • PHILIPS2.LIB
    9.1KB
  • 1n.lib
    249B
  • PHILIPS1.LIB
    4.9KB
  • MESFET_N
  • DEFAULT.LIB
    201B
  • MOS_4TDP
  • DEFAULT.LIB
    439B
  • DIODE
  • misc.lib
    682B
  • GENERAL1.LIB
    3.7KB
  • NATIONAL.LIB
    372B
  • GENERAL2.LIB
    36.5KB
  • MOTOROL2.LIB
    473B
  • ZETEX.LIB
    952B
内容介绍
=================================== Electronics Workbench =================================== Electronics Workbench sets the standard for affordable simulators. The tight integration of its schematic editor, SPICE simulator and on-screen waveforms makes what-if scenarios easy and instant. The full suite of analyses improves your productivity with insights into the behavior and stability of your designs. The SPICE 3 engine simulates analog, digital and mixed A/D circuits for exceptional power and accuracy. The extensive model library means you'll have the devices you need. And since Electronics Workbench can share design files with other simulators and export to PCB layout packages, it fits easily into your design flow. In short, you'll produce better designs, faster. The exceptional features of this latest release will come as no surprise to our 80,000 previous customers. Value, power and ease of use are what Electronics Workbench has always stood for. ======================================= INSTALLING THE DEMO ======================================= The demo must be installed on your hard disk, following these instructions: 1. Turn on your system and start Windows. 2. Insert the Electronics Workbench Demo CD into your CD drive. 3. For Windows 3.x, from the Program Manager, select File Menu and choose Run; Or, from the Start Menu in Windows 95/NT, choose Run. 4. Type z:\setup (where 'z' is your CD drive) and press ENTER. 5. Follow the directions on the display. The Electronics Workbench demo will be placed in a directory called EWBDEMO in the root directory of drive C, unless you specify a different drive or directory. 6. If you are running the demo on Windows 3.1/3.11, then you will also need to install Win32s which is also installed on the Demo CD. NOTE: Installing this version of WIN32S will over-write the previous version of WIN32S on your computer. Installation of WIN32S may affect the functionality of existing software. If this occurs, simply re-install the non-functioning software. ======================================= INSTALLING WIN32S ======================================= The demo must be installed on your hard disk, following these instructions: 1. Insert the Electronics Workbench Demo CD into your CD drive. 2. From Program Manager, select File menu and choose run. 3. Type z:\WIN32S\DISK1\SETUP.EXE(where 'z' is your CD drive) and press ENTER. ======================================= RUNNING THE DEMO ======================================= 1. If Windows is not running, start it by typing WIN at the DOS prompt. If the Program Manager window isn't displayed, double- click its icon. 2. If the Electronics Workbench group window is not open, double-click its icon. Double-click the Electronics Workbench icon. There are some prebuilt circuits that you can load from the File menu, or try building your own circuit. ======================================= LIMITATIONS OF THE DEMO ======================================= The following limitations apply to the evaluation version only: - You may create circuits containing up to 10 components. - Some analyses are available with the sample circuits provided. - Subcircuits are not supported. - Importing and Exporting netlists is not supported. - Printing and saving have been disabled. - All of the models included with Electronics Workbench are shown, but only the Ideal model in the Default library may be used in a circuit. - You may view the model parameters but not change them. - Only two ICs are included in each series. ======================================= SYSTEM REQUIREMENTS ======================================= WINDOWS 95 Requires Microsoft Windows 95 with Microsoft compatible mouse, 8MB of RAM (16 MB recommended) and 8MB of hard disk space. WINDOWS NT Requires Microsoft Windows NT with Microsoft compatible mouse, 12 Mb of RAM (16 MB recommended) and 8MB of hard disk space. WINDOWS 3.1 Requires Microsoft Windows 3.1 or 3.11 with Microsoft compatible mouse, 8MB of RAM (16MB recommended) and 8 MB of hard disk space. ======================================= HOW TO CONTACT US ======================================= For more information or to order, contact your local dealer or: Interactive Image Technologies Ltd. 111 Peter Street, Suite 801 Toronto, Ontario, Canada M5V 2H1 Tel: 416-977-5550 Fax: 416-977-1818 Sales: 800-263-5552 (only available in North America) Compuserve: 71333,3435 E-mail: ewb@interactiv.com BBS: 416-977-3540 Web: www.interactiv.com (c) Interactive Image Technologies Ltd., 1997
评论
    相关推荐
    • CAD-VBA.rar
      实现CAD软件高程属性点的坐标高程数据采集及存储,采用VBA开发
    • CADvba-visit-excel.rar
      CAD VBA调用excel数值自动绘图
    • AutoCAD-VBA命令大全.zip
      AutoCAD命令大全,vba平台,自动化
    • CAD-VBA开发人员手册.rar
      CAD VBA二次开发, 它是一个功能强大的开发工具,学好VBA可以成倍甚至成百、成万倍提高工作效率,在工作中,有很多任务仅用ACAD命令不可能完成的,只要学好VBA就可以做到,相信到时候您一定会得到同事的佩服、老板的...
    • AutoCAD-VBA-attribution.rar
      vba编程手册,提供了各种函数的相关参数和例子
    • AutoCAD-ActiveX-VBA.rar
      AutoCAD ActiveX/VBA 二次开发应用实例
    • CAD02Q2-NET.rar
      Doccument of progamming CAD
    • CAD_VBA开发手册
      回顾AutoCAD VBA 工程术语 回顾AutoCAD VBA 命令 第二章 理解ActiveX自动操作基础.. 理解AutoCAD对象模型 访问对象层次 通过集合对象操作 理解属性和方法 理解父对象 定位类型库 在数据库中返回第一个图元 ...
    • cadvba 命令.rar
      autocad vba 命令速查 虽然文件比较小,查找命令还是方便的
    • AutoCad_vba-master.zip
      lots of lisp routine from github