791793258ssc_battery_management.zip

Copyright 2008-2009, The MathWorks, Inc. Requirements: ------------------------- The minimum requirements for this demo are MATLAB, Simulink, and Simscape version R2009b or later. Running the demo: ------------------------- Open the model ssc_battery_management.mdl. Note that the battery parameters M-files are loaded automatically in the battery block's OpenFcn callback. You can right-click on the battery or alternator and go to "block choice" to change the alternator or battery size. If you change the battery block, the appropriate parameters are automatically loaded into the MATLAB workspace. Notes: ------------------------- 1. There is a version of the model ssc_sf_battery_management.mdl that uses Stateflow to control idle RPM compensation to maintain the battery voltage and alternator duty cycle. This demo requires a Stateflow installation and license. 2. There are additional alternator choices labeled "MBC", which require Model-Based Calibration Toolbox to be installed. If you select these and do not have Model-Based Calibration Toolbox, you will get a simulation error. 3. The MBC_Alternator directory provides a Model-Based Calibration Toolbox example from which the MBC alternator blocks were generated by mapping surfaces to the data.