• rafik2019
  • Others
  • 6.8MB
  • zip
  • 0
  • 5 积分
  • 1
  • 2022-01-10 03:03
--- name: USB-CAN Analyzer category: bzurl: oldwikiname: prodimagename: surveyurl: sku: 114991193 --- ![enter image description here]( The USB-CAN Analyzer is a cost-effective high quality and easy to use USB to CAN adapter. Compared with the 50$ or more expensive CAN Bus Analyzer, CAN Bus Tester, or CAN Bus Sniffer, the USB-CAN Analyzer only needs half the price, but it is even more convenient and easy to use. You can just communicate your CAN Bus device with your computer via the USB cable, then this tiny case will work as your can bus analyzer tool, can bus diagnostic tools, or can bus scanner. <p style="text-align:center"><a href="" target="_blank" rel='nofollow' onclick='return false;'><img src="" /></a></p> ## Features - Optimized the conversion protocol, improved conversion efficiency. - Saving the customized settings automatically. - Hex number converts to Decimal number visualized in the software. Decimal number show both value with symbol and without symbol, don’t need to use calculator. - Customized receiving ID, easy to debug. - Visualized CAN bus status. Convenient for analyze CAN Bus problem. - Can be saved as Excel or TXT file. - Receiving data can be refreshed and checked in order. ## Hardware Overview - Integrated TVS Surge Protection - Including 120 ohm matched resistance. ![enter image description here]( You can see an onboard green jumper cap as the following figure shown. When you add this jumper on, a 120Ω terminating resistor will be added to the circuit. Conversely, when you remove the jumper cap, the resistor will not be added into the circuit. Normally, you need to keep this jumper cap because the CAN device under test and the CAN analyzer are at the ends of the CAN network. If you want to know more, please check [120-ohm terminating resistor]( page from NI. ## Software in winwdows ### Basic Function - Support CAN2.0A(Standard) and CAN2.0B(Expansion) - CAN baud rate(5K~1M), customized CAN baud rate. - CAN send and receive data with time tag,can show the receiving data in order,can refresh data easily. - Data can be sent by single frame, multiple frames, manually, regularly, you can even set a certain time to send. ### Enhanced Function - Response to data received from a certain ID. - Can check CAN Bus status manually. - Can set to receive from the wanting ID directly, without setting filtering ID or shield ID. 4 working mode - Standard Mode: CAN communication - Loop Mode: Self-testing, in this mode, the analyzer will send and receive data itself, and also send data to CAN Bus. - Quiet Mode: Only use to monitor CAN Bus without influence. - Loop Quiet Mode: Warm testing - Data can be saved as TXT or Excel. Baud rate of virtual COM port can also be modified, default baud rate over 1M, so don’t need to worry about conversion efficiency. ### Advanced function - All customized settings saved automatically. - Easy secondary development,only need to handle 1 command. - Transparent Transition function - Software supports English ## Getting Started ### Materials required | Raspberry pi | USB-CAN Analyzer| Arduino Board |CAN-BUS Shield V2 | |--------------|-------------|-----------------|-----| |![enter image description here](|![enter image description here](|![enter image description here](|![](| |[Get ONE Now](|[Get ONE Now](|[Get ONE Now](|[Get ONE Now](| Also we need to two [male to male jumper]( and power cables to power those boards. ### Hardware Connection - **Step 1**. Plug the CAN BUS Shield V2 into the Seeeduino(or Arduino) Board - **Step 2**. Use the jumpers to connect the CAN terminal of both shield. |USB-CAN Analyzer|CAN-BUS Shield V2| |---|---| |CAN_0_L|CANL| |CAN_0_H|CANH| !!!Tip You can find the silkscreen at the back of the shield. - **Step 3**. Power the USB-CAN Analyzer and Seeeduino from computer. ![]( ### Software #### Install driver **1.For Linux** Get the CH341SER driver code. and install all linux kernel drivers ```bash git clone cd ~/USB-CAN-Analyzer/res/Driver unzip CH341SER_LINUX.ZIP cd /CH341SER_LINUX make load ``` !!!Tip It is not required for Raspberry to install this driver . Because OS of Raspberry has installed this driver **2.For Windows** You should click the [link]( to get driver and double-click to install it #### Communicate with Arduino CAN BUS Shield For Arduino CAN BUS Shield, we provide the Arduino Code, if you don't know how to use Arduino, please check [here]( Arduino Code for CAN BUS Shield: ```C // demo: CAN-BUS Shield, send data // #include <mcp_can.h> #include <SPI.h> // the cs pin of the version after v1.1 is default to D9 // v0.9b and v1.0 is default D10 const int SPI_CS_PIN = 9; MCP_CAN CAN(SPI_CS_PIN); // Set CS pin void setup() { Serial.begin(115200); while (CAN_OK != CAN.begin(CAN_500KBPS)) // init can bus : baudrate = 500k { Serial.println("CAN BUS Shield init fail"); Serial.println(" Init CAN BUS Shield again"); delay(100); } Serial.println("CAN BUS Shield init ok!"); } unsigned char stmp[8] = {0, 0, 0, 0, 0, 0, 0, 0}; void loop() { //send data: id = 0x00, standrad frame, data len = 8, stmp: data buf stmp[7] = stmp[7]+1; if(stmp[7] == 100) { stmp[7] = 0; stmp[6] = stmp[6] + 1; if(stmp[6] == 100) { stmp[6] = 0; stmp[5] = stmp[6] + 1; } } CAN.sendMsgBuf(0x00, 0, 8, stmp); delay(100); // send data per 100ms } // END FILE ``` For USB-CAN Analyzer , we provide two way that include windows and linux . **1.For Linux** ```bash cd ~ git clone cd ~/usb-can gcc -o canusb canusb.c ./canusb -d /dev/ttyUSB0 -s 500000 -b 9600 ``` we assume that you only inset one USB to TTL on your raspberry. **2.For Windows** You should click the [link]( to get software. ## Resources - **[PDF]** [Software on Windows]( ## Tech Support Please submit any technical issue into our [forum]( or drop mail to <br /><p style="text-align:center"><a href=""
      stk3332 datasheet,stk3332 说明文档
    • STK.rar
      STK是由美国Analytical Graphics公司开发的一款在航天领域处于领先地位的商业分析软件。STK支持航天任务的全过程,包括设计、测试、发射、运行和任务应用
    • STK模型转换工具LwConvert
      stk的模型转换软件 将lwo格式的模型转换成mdl *.lwo向*.mdl转换是利用STK软件自带模型转换小软件LwConvert.exe完成的,根据转换模型类型的不同,还要进行转换前的设置。该处模型类型包括空间飞行器、地面固定设施...
    • VC++连接STK
      STK上进行二次开发,本例是用VC++连接STK的具体实例,已调试通过。-STK carried out in the second development, which in this case is VC++ Connect STK specific examples have been debug through.
    • STK轨道预报模型(propagation).zip
    • Stk_AspEms
      Stk网站后台生成系统v1.2 使用方法: <br/>1.将已经建好表格的数据库文件(MDB格式)复制到Aspfile/DataTemp中,例如 <br/>2.添加数据库,进入系统后点添加,将你网站的数据库名以及网站的样式表...
    • STK官方模型
      STK官方模型,非安装文件自带的,模型丰富。先在我上传的资源中下载STK models目录,然后在我上传的资源中找相应的模型。经测试,从STK8.0到STK11都可用。本资源为模型,分类air。
    • Android stk
      Android stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stkAndroid stk
    • Mobile STK-开源
      Mobile STK是最初由Perry Cook和Gary Scavone开发的Synthetic Toolkit移植到移动设备(Symbian OS和Windows CE)的端口。 STK是一组音频信号处理和算法综合类。
    • android 2.3stk
      android 2.3系统stk.apk 非常实用,切换号码快