ruuvitracker_fw

  • M7_573941
    了解作者
  • 207.9KB
    文件大小
  • zip
    文件格式
  • 0
    收藏次数
  • VIP专享
    资源类型
  • 0
    下载次数
  • 2022-06-13 04:48
    上传日期
具有 使用 有关执行环境的详细信息,请参见。 待办事项:随着的开发板提供更多功能,请为它们提供文档。 原理图,数据表和其他与硬件相关的参考位于 -repo中。 REPL快速入门 在Linux上,REPL在ACM设备上,如果没有其他CDC串行端口,则在/dev/ttyACM0 。 在OSX上,它位于/dev/tty.usbmodemXXXX (确切的数字可能是特定于主板的)。 闪烁==安装 运行ruuvi_program.sh ,它将查找已编译的固件并安装“ best”,您需要sudo权限和df-util。 断开USB和电池的连接以进行完整的硬件复位,然后重新连接USB以获取串行端子和板卡的闪存驱动器。 将stmhal/boards/RUUVITRACKER_C3/copy_to_board下的文件和目录复制到板载闪存驱动器。 建造 注意:构建需要正确的git克隆,我们使用子模块,
ruuvitracker_fw-MicroPython.zip
内容介绍
# RuuviTracker with [MicroPython][upy] ## Using See [MicroPython documentation](http://docs.micropython.org/en/latest/) for details about execution environment. TODO: Document the board specific python modules via [gh-pages](https://pages.github.com/) as they get more functionality. Schematics, datasheets and other hardware related references are in the [ruuvitracker_hw](https://github.com/RuuviTracker/ruuvitracker_hw/tree/revC3) -repo. ### REPL quickstart On Linux the REPL is on ACM device, `/dev/ttyACM0` if you don't have any other CDC serial ports. On OSX it's on `/dev/tty.usbmodemXXXX` (exact number is probably board specific). ## Flashing == Installing Run `ruuvi_program.sh`, this will look for compiled firmware and install the "best", you need sudo rights and df-util. Disconnect USB and battery to do a full hw-reset and reconnect USB to get the serial terminal and board flash-drive. Copy the files & directories under `stmhal/boards/RUUVITRACKER_C3/copy_to_board` to the board flash-drive. ## Building NOTE: Building requires a proper git clone, we use submodules and you must be able to init/update them too. Building is simple, run `./ruuvi_build.sh` If you want to build for a different board than RUUVITRACKER_C3 (which is revC2 compatible if you happen to have C2) run `BOARD=MYBOARD ./ruuvi_build.sh`, in this case you must have your board files in the standard location under `stmhal/boards/`. TODO: List build dependencies, meanwhile check out <http://kirjoitusalusta.fi/ruuvitracker-ubuntu1404> [upy]: http://micropython.org/
评论
    相关推荐